Various types available, exceedingly well fabricated carriage plates with standard 43” pallet forks.
From £365 No-VAT!
A multi-purpose, 3-point linkage implement having dual usage; not only a pallet fork, but by removing the forks from the carriage plate, one can use it to move all types of trailers that have a tow-ball hitch.
From £385 No-VAT!
A multi-purpose, 3-point linkage implement having dual usage; not only a pallet fork, but by removing the forks from the carriage plate, you can fit the bale spike for the use of moving round bales with ease.
From £350 No-VAT!
3-Point Linkage Pallet Forks adjustable for various size pallets. Please call for stock availability and prices.
Concrete ballasted with a 6’ rolling cover. These Rolls can be attached to most small tractors allowing even the tightest corners of your paddocks to be rolled. Weighing in at approximately 500kgs with a 15” diameter drum, giving an excellent psi.
Only £550 No-VAT!
Attaches to 3-Point linkage.
Only £500 No-VAT!
Drag Roll A very similar Roll to the 3-point linkage Roll. This Roll can be towed behind a tractor, 4x4 or quad-bike.
Only £575 No-VAT!
Best of Both. Drag and 3-Point Linkage Flat Roll combination.
Ferguson Style reproduction Transport Box and accessories.
5'L x 3'D x 2'H. 3mm Steel base and 2mm sides with box sections on under side for Pallet forks. Also with a removable rear section for easy loading/unloading.
£155 with No-VAT!
A most useful piece of equipment to make use of your Ferguson Link Box. This wheel barrow conversion kit turns your Ferguson Link Box into a large and stable wheel barrow. The conversion kit also allows you to position your Link Box maybe into a tight corner perhaps for storage, where you might not otherwise be able to whilst the Link Box is attached to your tractor.
Ferguson Transport /Link Box Tailgates are available. They are supplied in a red-oxide to allow you to paint in a matching grey to suit your own Link Box.
£95 No-VAT! (includes pins)
A must for when using a Massey Ferguson Jack. This attachment will keep your tractor suspended for as long as your require and will also keep your implements clear of the ground (even after you have switched off the tractor).
£95 No-VAT! (includes pins)
A must for when using a Ferguson Jack. This attachment will keep your tractor suspended for as long as your require and will also keep your implements clear of the ground (even after you have switched off the tractor).
3-Point Linkage Tow-Ball A very useful item for the ease of moving all ball hitch trailers.
This conversion kit enables the owners of a Ferguson saw bench to use the saw bench on any tractor they decide. The kit simply bolts onto the main frame after removing the original attachment frame which can simply be replaced to return it to a standard Ferguson Saw bench if required. The conversion kit comes complete with mounting bolts, a central bearing and PTO shaft. All you need to supply is your own belt pulley and shorter length of pulley belting. 1 1/8" - 1 3/4" pulleys can be used.
£300 with No-VAT!
A heavy duty Hoist/Crane designed along the lines of the New Zealand Ferguson Crane. This implement fit a 9-hole drawbar and to the top link bracket of your tractor. The Hoist/Crane will fit any tractor with ease. The main beam is extendable and has a lifting height of 9’ when fully extended, depending on the tractor it is fitted to.
Keep your manege tidy and level with this implement. It also incorporates a front tine arrangement which can be angled in various positions to loosen the ground structure and allow the Grader bars to create an even surface. Ideal for use on rubber or sand surfaces. Adjustable front tines. Suitable for all light weight tractors.
This frame will support the bag whilst being filled either on a pallet or on the ground thanks to the adjustable arms. When the bag is full simply slide the frame away from the bag. The frame will be galvanised for long life protection.
A very useful, economic trailer, particularly with the use for small holders, or for equine establishments. These trailers have a new steel framework, with wooden sides and floor, being of softwood (hardwood available at an extra cost) treated with good traditional creosote, which can easily be reapplied for ease of maintenance. The tailgates of these trailers can be removed and stored at the front head-board of the trailers for safe keeping. Carrying weight of the Trailer is approximately 30cwt. These trailers are non-tipping so therefore keeping the loading height to a minimum. The drawbar hitch is of a ring-hitch type.